Shopping Cart
no products

36V 2A lithium Li-ion 10S charger Output 42V - Dealer

Product No.:
c36-303
Shippingtime:
ca. 3-4 days ca. 3-4 days
RRP 69,86 EUR
only 39,92 EUR

incl. 20% tax excl. Shipping costs

36V 2A lithium Li-ion 10S charger Output 42V

 

 

Product description

This high - quality charger for batteries comes in an plastic housing.

Attention! Check the specifications of the charger for your battery!
 

Charge time:

A rule of thumb for the calculation of the charging time results from the battery capacity and the charging current.
For example with a completely emptied battery with 20Ah capacity and a charger with 2A charging current it results approximately:

20Ah : 2A = 10h maximum charging time with a 2A charger

The charging time is therefore shortened accordingly depending on the charge output state of the battery.

 

Usage:

Connect the charging connector to the battery first, then connect the power plug to the standard 230V power socket. An LED indicator on the charger symbolizes charging. After full charge, the charger turns off and the LED indicator symbolizes the full charge. Your battery is fully charged and can be used.

 

Technical specifications

Model

c36-303 in a plastic housing

Configuration suitable for

36V 10S Li-ion - Lithium battery Output 42V

Input

100-240VAC 50/60Hz

Nominal voltage

36V

Output

42V

Charging current

max. 2A

Operation temperature

0°C till 35°C

Display

LED red - charging / green - fully charged

Connection input

Standard power plug (europe) type C

Connection output

XLR connection

Polarity

Pin1 + Pol / Pin3 - Pol

Measurements l*w*h

approx. 140mm * 60mm * 32mm

Weight

approx. 270g

Attention! not suitable for

LiFePo4 or lead batteries
(for these batteries we sell other chargers)

 

Included in delivery

1x Charger

 
1x Power plug  
1x Manual  

 

 

Attention!

  • The charging connector is a XLR connector. The polarity of the chargers and the
    connection socket of various eScooter is not standardized!

  • Please check the correct polarity and voltage of the charger before connecting it!
    Our polarity of the XLR connector is 1+ / 3 -

  • Incorrectly connected polarity or voltage can damage the charger or the battery!

  • This charger is only suitable for indoor use!

  • Please disconnect the charger after full charge from the battery!
    The max. charging time of the battery can be calculated with following formula:
    capacity (Ah) of the battery divided with the charging current (A) of the charger = Charging time in hours (h)

  • We assume no liability for improper use!